Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Laboratory Use |
Brand | Sundy |
Model Name/Number | SDTGA6000 |
Temperature | 1000 Degree C |
Number of Samples | 16 |
Power | 4kW |
Dimensions | 845x563x596mm |
Weight | 146 kg |
Intelligent Control | With Ethernet bus communication technology, several Thermogravimetric Analyzers can be controlled by one PC, no interference between each other. Strong data processing capability, statistics report and printing function. Capable of connecting with network and balance by RS232 interface. |
Optimized Design | Flexible software design, test procedure, analysis time, temperature etc. can be customized. 19 samples can be loaded once + 1 blank sample position. Unique sample weighing mode, single sample weighing and batch sample weighing are both available, makes the operation convenient. |
Performance Index | -Advance Calculation: Yes -Analysis Report: Yes -Balance Resolution: 0.0001g -Furnace Heating: Resistance Wound -Furnace Temperature: Room temperature~1000℃ -Gas Requirement: Nitrogen/Oxygen/Compressed Air -Humidity: <80% -Interface: RS232 -Max. Samples: 19 samples + 1 blank sample position -Operational Control: Windows®-based software on external PC/Windows7/WindowsXP -Power Requirement: 220 V(±10%),50 / 60Hz -Precision: 0.02% RSD (1σ, 1g sample) -Sample Introduction and Taking: Automatic -Sample Weighing: Under normal temp. -Sample Weight: 0.5 up to 5g -Standards: ISO 11722, ISO 1171, ISO 562, ASTM D3173/D3174/D3175/D5142/D7582 -Statistics Report: Yes -System Monitor: Yes -Temperature Calibration: Standard thermocouple -Temperature Control Precision: ±2℃ -Temperature Resolution: 0.1℃ -Test Index: Moisture, ash and volatile matter |
Additional Information:
Product Details:
Material | Stainless Steel |
Temperature Range | Degree C |
Automation Type | Automatic |
Analysis Time | 7- 20 Min |
Weight | 45 kg |
Accuracy | 0.2% |
Product Details:
Minimum Order Quantity | 1 Piece |
Machine Type | Elemental/ Benchtop/ Automatic/ Infrared |
Usage/Application | SDS350 can be used to determine the sulfur content in coal, coke, ash, biomass fuels and other combu |
Brand | Sundy Sciences |
Model Name/Number | SDS 350 |
Ambient Temperature | +12 Deg C to +40 Deg C |
Power | 2.7 kW |
Detection Limit | 15ppm |
Analysis Range | 5ppm |
Material | Mild Steel |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | SDAC6000 |
Brand | Sundy |
Automation Grade | Fully Automatic |
Usage/Application | SDAC6000 can be used to determine the calorific value of solid and liquid combustibles such as coal |
Analysis Time | 8 min |
Temperature Resolution | 0.0001K |
Model Number | SDAC6000 |
Gas Requirement | Oxygen |
Precision | 0.1% RSD |
Analysis Time Fast mode Temperature Resolution 0.0001???
Heat Capacity Precision(1g Benzoic Acid) ≤ 0.05%
Calorimeter Type Isoperibol
Heat Capacity Stability ≤0.20??? within three months
Network/Balance Connection Available (by interface RS232)
Power Requirement 220V(-15%???10%)???50/60Hz
Highlights???
Optimized design, fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering, full test process is less than 10 minutes.
Good environment adaptability, precise, accurate and reliable rest result.
Accurate and reliable test result.
Reasonable structure, reliable operation, safe and environment friendly.
Conformance to Standards???
ASTM D5865-2007; ASTM D240; ASTM D4809-13; ASTM E711; BS EN 14918; ISO 1928 ; ISO 9831
Additional Information:
Product Details:
Automatic Grade | Automatic |
Power | 24kW |
Weight | 52kg |
Dimensions | 512x452x608mm |
Analysis Time | 20~30min |
Number of Samples | 18 |
We are engaged in offering Coal Moisture Analyzer product to our clients. Our range of this products is widely appreciated by our clients
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Stainless Steel |
Flow Rate | 0.3 to 3 lpm |
Resolution | 1 mm Hg |
Working Temperature Range | 20 Degree C to 60 Degree C |
Option | Automatic Power plant |
Samples | Processes up to 48 samples in about 4 hours |
Application
It is used for primary crushing (13mm or 6mm) and dividing in the fields of power, coal, chemistry industry, construction materials, inspection, environmental protection and academic institution.
Features
1.Good adaptability for moisture level
The system adopts patented technologies like umbrella spins, frequency conversion feeding, separate-slot type crushing sieve screen and hammer head, etc.
2.Good sample representativeness
Unblocked and less residue, avoid the adhesion, blockage and blending.
Adopt scrape type belt divider with shaping device to scrape the sample in full section with accurate division.
3.Intelligent control
PLC control, touch screen and control box are equipped, system operation will be monitored remotely.
Specification
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | SDFCL3000 |
Brand | Sundy |
Usage/Application | SDFCl3000 fluorine and chlorine analyzer can be used to determine the fluorine and chlorine content |
Model | SDFCL3000 |
Application | Industrial Use, Laboratory Use |
Weight | 80 kg |
Oxygen Purity | 99.5% |
Analysis Time | 3~6min |
Configuration | benchtop |
Measured value | elemental |
Power | 3kW |
Sample Weight | 50mg |
Measured entity | chlorine,fluorine,coal |
Other characteristics | high-temperature,laboratory |
Test Range | 0.01%~35% |
Furnace Temperature | 1150 Degree C |
Dimensions | 860x530x380mm |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Stainless Steel |
Usage/Application | Industrial |
Packaging Type | Wooden Box |
Grade | Automatic |
Supply | AC |
I Deal In | New Only |
Conformance to Standards | SO 5074:1994 Hard coal-Determination of Hardgrove Grindability Index. ASTM D409-08 Standard Test Met |
Weight | 52 kgs |
Cabinet Dimension | 400 mm x 550 mm x 600 mm |
Continual Detection Capacity | Greater than 104 m |
Temperature Accuracy | +/-1 |
Application | This instrument can be used to determine grindability of coal in coal industry,power plants,metall |
Power | Greater Than 5 KW |
Additional Information:
Product Details:
Model Name/Number | SDACM4000 |
Brand | Sundy Sciences |
Automation Grade | Automatic |
Usage/Application | calorific value of fuel |
Power | 0.5kW |
Weight | 106kg |
Temperature Resolution | 0.0001K |
Bomb Volume | 282ml |
Bomb Pressure | 20Mp |
Gas Requirement | Oxygen |
Analysis Time | 15min-25min |
Heat Capacity Stability | 0.25% |
Bucket Filling | Automatic |
Dimension | 600x417x908 mm |
Energy Measurement Range | 0~50000J |
Working Temperatures | 32 Degree C |
Precision | 0.15% |
Test per Hour | 2-4 |
Temperature Measurement | PT1000 |
Average Temperature Increase | 2 Degree C |
Additional Information:
Product Details:
Model Name/Number | SDS616 |
Analysis Time | 3~6min |
Weight | 80kg |
Furnace Temperature | 1150 Degree C |
Oxygen Purity | 99.5% |
Dimensions | 860x530x380mm |
Power | 3kW |
Test Range | 0.01%~35% |
Sample Weight | 50mg |
Brand | PROSOFT |
Delivery Period | 20 Days |
Display | Big Jumbo LCD 20x4 (Blue Colour) |
GCV Range | Up to 10,000 Kcal |
Gas Filling System | Push-n-Fit |
Keypad | 16 soft touch |
Least Count | 0.0010C |
Payment Terms | 100% Advance + Purchase Order |
Additional Information:
Product Details:
Display Type | Digital |
Temperature | 160 Deg C |
Resolution | 1 Deg C |
Automation Grade | Automatic |
Furnace Temperature | 1600 Deg C |
Model Number | SDAF105B |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Stainless Steel |
Sample type | Automatic |
Temperature | 50 Degree C |
Humidity | 95% |
Gas Sampling Rate | I -2 LPM |
Dilution Accuracy | Less than 5 % |
Application
All-pass sampling system can be widely used for bulk sample mechanical automation collection of wagon receiving coal and minerals in electric power, steel, coking, coal, chemical, cement, port, food industries, etc.
No matter what kind of sampling head (auger type, claw type, cylinder type) or sampling method (full section, non-whole section) is adopted, according to the practice, wagon/train mechanical automatic sampler can realize barrier-free sample collection. But because of the limits of the crushing system, traditional sampler has the common problem of "can finish sampling but can't finish sample preparation". By using Sundy original umbrella spinTM technology, all-pass sampling system completely solves the problems of "blockage" and "stuck" in the process of sampling, and the system itself is not restricted by moisture and is all-pass operation.
All-pass sampling system includes wagon sampling system, train bridge/portal sampling system, belt sampling system (Cross belt/ Falling stream), so its design, manufacturing and performance is in line with standards. Based on jobsite situation and different customized needs, Sundy can provide "one-to-one" professional products consulting and re-design service to meet the customer needs to the maximum extent.
Application
All-pass sampling system can be widely used for bulk sample mechanical automation collection of wagon receiving coal and minerals in electric power, steel, coking, coal, chemical, cement, port, food industries, etc.
Additional Information: